The Krohn-Hite Models 7600 Series provides 17/34 watts of continuous power and 141V/282V rms from dc to 500kHz. Frequency response is ±0.1dB to 10kHz, and distortion is <0.01% to 5kHz, <0.3% to 100kHz. The voltage gain can be either inverting or non-inverting and selectable ranges from 0dB-14dB, 0dB-28dB and 0dB-42dB, and is continuously variable between ranges. (read more)

From Digi-Key, the TAS5706 is the world's 1st 20-W Stereo Digital Audio Amplifier with integrated feedback (A.K.A. closed loop). (read more)

Spectrum Control now offers its high performance series 700 D-subminiature filtered connectors in significantly shorter lead times. With their new State College, PA ceramics facility in full production, Spectrum Control's in-house ceramic tube production ensures world-class quality and superior filtering with connector lead times as short as two-weeks. (read more)

Stealth Microwave, Inc. is Micronetics' Linear Power Amplifier Group, and offers one of the broadest selections of high-end multi-carier power amplifiers in the industry. Stealth specializes in a proprietary linearization capability that allows for smaller size amplifier solutions with a fraction of the power consumption. (read more)

IFI's Super Summer Amplifier Deal Extended Thru September 08!
Buy any IFI amplifier before September 30, 2008 and get a free Antenna.
Choose any amplifier from 10KHz to 40GHz, for your automotive, industrial,
medical or aerospace needs – and we'll supply you with a free Instruments for
Industry (IFI) test antenna. (read more)

All Industrial Test Equipment, Inc./Powertron, amplifiers are class B with overall feedback resulting in zero ohms output impedance. Of course, this will accommodate 50 ohm loads. (read more)

Cougar Components is introducing many low noise amps with the spring publication of the 2005/2006 Designer's Selection Guide. AC1291 and AS3093 are just two examples, offering low noise figure of 1.3 dB and <1.7 dB, respectively. (read more)

Avago Technologies' ALM-32320 is a high linearity 2 Watt PA with good OIP3 performance and exceptionally good PAE at 1dB gain compression point. The ALM-32320 is optimized for general purpose gain block and class A driver amplifier for WiMAX base station applications. (read more)

The ALM-32120 is a high linearity 2 Watt PA with good Output IP3 performance and exceptionally good Power Added Efficiency, achieved through the use of Avago Technologies' proprietary 0.25um GaAs Enhancement-mode pHEMT process. (read more)

AMTI's DSA-6 six-channel, high gain, strain gage amplifier, is a complete solution for your analog signal conditioning needs. Fabricated from the highest stability and lowest noise components available today, the DigiAmp was developed and built to be flexible, reliable, and easy to use. (read more)